Jameco Electronics 3000 User Manual
224
Rabbit 3000 Microprocessor
The following I/O read time delays were measured.
The measurements were taken at the 50% points under the following conditions.
•
T = -40°C to 85°C, V = 3.3 V
•
Internal clock to nonloaded CLK pin delay
≤ 1 ns @ 85°C/3.0 V
The following I/O write time delays were measured.
The measurements were taken at the 50% points under the same conditions that the I/O
read delays were measured.
read delays were measured.
I/O bus cycles have an automatic wait state and thus require 3 clocks plus any extra wait
states specified.
states specified.
See Table 16-2 for delays at other voltages.
Table 16-5. I/O Read Time Delays
Time Delay
Output Capacitance
30 pF
60 pF
90 pF
Max. clock to address delay (T
adr
)
6 ns
8 ns
11 ns
Max. clock to memory chip select delay (T
CSx
)
6 ns
8 ns
11 ns
Max. clock to I/O chip select delay (T
IOCSx
)
6 ns
8 ns
11 ns
Max. clock to I/O read strobe delay (T
IORD
)
6 ns
8 ns
11 ns
Max. clock to I/O buffer enable delay (T
BUFEN
)
6 ns
8 ns
11 ns
Min. data setup time (T
setup
)
1 ns
Min. data hold time (T
hold
)
0 ns
Table 16-6. I/O Write Time Delays
Time Delay
Output Capacitance
30 pF
60 pF
90 pF
Max. clock to address delay (T
adr
)
6 ns
8 ns
11 ns
Max. clock to memory chip select delay (T
CSx
)
6 ns
8 ns
11 ns
Max. clock to I/O chip select delay (T
IOCSx
)
6 ns
8 ns
11 ns
Max. clock to I/O write strobe delay (T
IOWR
)
6 ns
8 ns
11 ns
Max. clock to I/O buffer enable delay (T
BUFEN
)
6 ns
8 ns
11 ns
Max. high Z to data valid rel. to clock (T
DHZV
)
10 ns
12 ns
15 ns
Max. data valid to high Z rel. to clock (T
DVHZ
)
10 ns
12 ns
15 ns