Multi-Tech Systems RF660 User Manual

Chapter 2 – Installation  

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

22 

 

Before installing, you should plan your network and decide which computer is to have access to which services. This 
simplifies configuration and saves you a lot of time that you would otherwise need for corrections and adjustments. 
 
 
 

Enter the configuration information (e.g., the IP addresses used, Net Mask addresses, and the Default Gateway) into the 
appropriate field of the Address Table below. Please print this page and use it to fill in your specific ROUTEFINDER and 
network information (e.g., the IP address used, email lists, etc.), and keep it for future reference. 

 

IP Address 

Net Mask 

Default Gateway 

Network Card connected 
to the internal network 
(LAN on eth0) 

 
___.___.___.___ 

 
___.___.___.___ 

 

Network Card connected 
to the external network 
(WAN on eth1) 

 
___.___.___.___ 

 
___.___.___.___ 

 
___.___.___.___ 

Network Card connected 
to the DMZ 
(eth2) 

 
___.___.___.___ 

 
___.___.___.___ 

 

 
 

The system administrator must complete these setup requirements before installing the ROUTEFINDER software: 

• 

Set the correct configuration of the Default Gateway  

• 

Install an HTTPS-capable browser (e.g., the latest version of Microsoft Internet Explorer or Netscape 

Navigator)  

• 

Activate JavaScript and Cascading Style Sheets  

• 

Make sure that no proxies are entered in the browser  

• 

If Secure Shell (SSH) is to be used, you must install an SSH client program (e.g., PuTTY in Windows 2000 

or the bundled SSH client in most Linux packages).