Multi-Tech Systems RF660 User Manual
Chapter 3 – Configuration
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)
29
Second Configuration Step
Using the Wizard Setup is a quick way to enter the basic configuration parameters to allow communication between the
LAN’s workstation(s) and the Internet as shown in the example below.
LAN’s workstation(s) and the Internet as shown in the example below.
Important Note:
An initial configuration must be completed for each type of RouteFinder functions: firewall configuration,
LAN-to-LAN configuration, a LAN-to-Remote Client configuration.
Note About License Agreements:
It is suggested that you read the legal information and license agreement before
beginning the configuration. This information can be found in the Appendix.
RouteFinder VPN Initial Configuration
The addresses used in this example are entered through the Wizard Setup. See the screen example on the next page.