Multi-Tech Systems RF660 User Manual
Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)
57
Administration > User Authentication > RADIUS & SAM
SAM Prerequisite
In order to be able to use this authentication method, your network requires a Microsoft Windows NT or 2000
computer that contains the user information. This can be a Primary Domain Controller (PDC) or an independent
server.
This server has a NETBIOS name (the NT/2000 server name) and an IP address.
computer that contains the user information. This can be a Primary Domain Controller (PDC) or an independent
server.
This server has a NETBIOS name (the NT/2000 server name) and an IP address.
1.
Under the Administration menu, open User Authentication > RADUIS & SAM.
Domain
Enter the name of your MS Windows NT/2000 domain into this field.
Accepted characters are: the alphabet, the numbers 0 to 9, the minus sign, and underscore.
Caution:
This is not an Internet domain (e.g., Company.com) but a simple denominator (e.g.,
Intranet). If, instead of using the Microsoft domain concept, you only have a simple server,
then enter the NetBIOS name. This corresponds to the entry in the PDC name entry field.
then enter the NetBIOS name. This corresponds to the entry in the PDC name entry field.
PDC Name
Enter the NETBIOS name of the primary domain controller into this field. As of Microsoft
Windows 2000, these names are also official DNS names. The RouteFinder only supports
names consisting of alphanumeric and minus and full-stop characters. Special characters
such as % ! # _ { } are not permitted.
names consisting of alphanumeric and minus and full-stop characters. Special characters
such as % ! # _ { } are not permitted.
PDC IP
Enter the IP address of the primary domain controller into this field.
BDC Name
If you are using a backup domain controller, enter the name into this field. If you do not have
a backup domain controller, enter the PDC name again.
BDC IP
Enter the IP address of the backup domain controller into this field. If you do not have a
backup domain controller, enter the PDC IP address again.
backup domain controller, enter the PDC IP address again.
2.
Confirm your entries by clicking the Save button.
Important Note:
If you are using SAM authentication, you should deactivate the guest account of your Windows
domain. Otherwise all user/password combinations are counted as valid.
domain. Otherwise all user/password combinations are counted as valid.
SAM
This authentication method uses an MS Windows NT/2000 domain controller or a standalone server to evaluate the
requests. Many businesses are already using MS Windows NT/2000 networks that are based on the MS Windows
NT/2000 active directory domain concept.
The advantage of SAM is that it is very easy to configure if there is already a PDC (Primary Domain Controller) or a
simple server with a user database running in the network.
requests. Many businesses are already using MS Windows NT/2000 networks that are based on the MS Windows
NT/2000 active directory domain concept.
The advantage of SAM is that it is very easy to configure if there is already a PDC (Primary Domain Controller) or a
simple server with a user database running in the network.
The disadvantage is that this model cannot discern between different user groups and proxies. This means that you
can grant only all users or none of the users access to a particular proxy.
can grant only all users or none of the users access to a particular proxy.
SAM Settings
Domain
Enter the domain name of the PDC/DC Domain.
Primary Domain Controller Name
Enter the NETBIOS name of the Domain Controller.
Primary Domain Controller Address
Enter the address of the Domain Controller.
Backup Domain Controller Name
Enter the NETBIOS name of the Backup Domain Controller (if present). If you are not using a backup
domain controller, then you can enter Primary Domain Controller name in this field.
domain controller, then you can enter Primary Domain Controller name in this field.
Backup Domain Controller Address
Enter the address of the Backup Domain Controller.
Save
After entering the above parameters, click the Save button.