Multi-Tech Systems RF660 User Manual
Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)
87
Network Setup > PPPoE
Network Setup > PPPoE
PPPoE (Point-to-Point Protocol over Ethernet) is a specification for connecting multiple computer users on an Ethernet local
area network to a remote site through DSL or cable modems or similar devices. PPPoE can be used to have an office or
building-full of users share a common Digital Subscriber Line (DSL), cable modem, or wireless connection to the internet.
PPPoE combines the Point-to-Point (PPP), commonly used in dialup connections, with the Ethernet protocol which support
multiple users in a local area network.
area network to a remote site through DSL or cable modems or similar devices. PPPoE can be used to have an office or
building-full of users share a common Digital Subscriber Line (DSL), cable modem, or wireless connection to the internet.
PPPoE combines the Point-to-Point (PPP), commonly used in dialup connections, with the Ethernet protocol which support
multiple users in a local area network.
Important:
If DHCP client is enabled, the PPPoE cannot be used. The internet connection can be either PPPoE or DHCP
client at any given time.
PPPoE on WAN
Enable PPPoE on WAN
To Enable PPPoE on WAN, check the corresponding box. This will enable the interface connected to the
ADSL modem (this will be the interface to the internet).
ADSL modem (this will be the interface to the internet).
User Name
This field defines the ADSL User Name given by the ISP.
Password
The user’s password must be entered in this field.
DNS Address from Peer
Check this box if you want to obtain DNS server addresses from the peer (i.e., the ISP).
Save
Click Save to activate these settings.