•  For use in dry, oil free indoor environments only.
•  Do not use to link between buildings.
•  Not suitable for use in hazardous or explosive environments or next to highly

flammable materials.

• Ensure that all twisted pair interconnect cables are installed in compliance

with all applicable wiring regulations.

• Do not connect the CATx link interface (RJ45 style connector) to any other

equipment, particularly network or telecommunications equipment.

• Where possible, avoid laying the twisted pair link cable(s) alongside power

cables.

• Warning – the power adapter contains live parts.
• No user serviceable parts are contained within the power adapter - do not

dismantle.

• The primary means to cease operation of the modules is to remove the

power adapter lead. Ensure that the power adapter is positioned near to the
equipment and is easily accessible.

• Do not use the power adapter if the power adapter case becomes damaged,

cracked or broken or if you suspect that it is not operating properly.

• Replace the power adapter with a manufacturer approved type only.
• If you use a power extension cable with the modules, make sure the total

ampere rating of the devices plugged into the extension cable do not exceed
the cable’s ampere rating. Also, make sure that the total ampere rating of
all the devices plugged into the wall outlet does not exceed the wall outlet’s
ampere rating.

• Do not attempt to service the modules yourself.
• The modules and power supplies can get warm in operation – do not situate

them in an enclosed space without any ventilation.

• The modules do not provide ground isolation and should not be used for

any applications that require ground isolation or galvanic isolation.

• Use only with grounded outlets at both the computer and monitor. When

using a backup power supply (UPS), power the computer, the monitor and
the module from the same supply.

• For correct operation, the transmitter and receiver modules must have

ground connections. At the computer end, this is achieved by ensuring that
the computer that the module is connected to has a ground connection. At
the audio/visual device end, this can be achieved by ensuring that the power
supply is connected to a grounded power outlet. Alternatively, a ground
connection will be made via the monitor, if the monitor is itself grounded.

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in
workmanship and materials for a period of two years from the date of original
purchase. If the product should fail to operate correctly in normal use during the
warranty period, Adder will replace or repair it free of charge. No liability can be
accepted for damage due to misuse or circumstances outside Adder’s control.
Also Adder will not be responsible for any loss, damage or injury arising directly
or indirectly from the use of this product. Adder’s total liability under the terms
of this warranty shall in all circumstances be limited to the replacement value
of this product. If any difficulty is experienced in the installation or use of this
product that you are unable to resolve, please contact your supplier.