Cisco Systems UBR900 User Manual

Cisco IOS Release 12.0(7)T

To display the current DHCP settings on point-to-point interfaces, enter the show dhcp command 
from privileged EXEC mode.

show dhcp {lease | server}

Syntax Description

Defaults

No default behavior or values.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

You can use this command on any point-to-point type of interface that uses DHCP for temporary IP 
address allocation.

Examples

Following is sample output for the show dhcp lease command:

uBR924# show dhcp lease

Temp IP addr: 188.188.1.40  for peer on Interface: cable-modem0

Temp sub net mask: 0.0.0.0

   DHCP Lease server: 4.0.0.32, state: 3 Bound

   DHCP transaction id: 2431

   Lease: 3600 secs,  Renewal: 1800 secs,  Rebind: 3150 secs

Temp default-gateway addr: 188.188.1.1

   Next timer fires after: 00:58:01

   Retry count: 0   Client-ID: 0010.7b43.aa01

Table 14 describes the significant fields shown in the display.

Shows DHCP addresses leased from a server.

Shows known DHCP servers.

11.3 NA

This command was introduced.