Cisco Systems UBR900 User Manual
show interfaces cable-modem
Configuring the Cisco uBR900 Series Cable Access Routers 111
show interfaces cable-modem
To display information about the Cisco uBR900 series cable access router’s cable interface, enter the
show interfaces cable-modem command from either user EXEC mode or privileged EXEC mode.
show interfaces cable-modem command from either user EXEC mode or privileged EXEC mode.
show interfaces cable-modem number [accounting | counters | crb | irb | type]
Syntax Description
Defaults
No default behavior or values.
Command Modes
User EXEC or privileged EXEC
Command History
Usage Guidelines
When this command is entered without a keyword, general information about the cable interface is
displayed.
displayed.
number
Cable access router interface number.
accounting
(Optional) Displays the number of packets of each protocol type that has been sent
through the cable access router interface.
through the cable access router interface.
counters
(Optional) Shows MIB counters on the cable interface.
crb
(Optional) Displays concurrent routing and bridging information for each interface
that has been configured for routing or bridging. This option does not really apply to
the Cisco uBR900 series; it is included because it is part of the subsystem that
provides DOCSIS-compliant bridging. For more information, refer to the
that has been configured for routing or bridging. This option does not really apply to
the Cisco uBR900 series; it is included because it is part of the subsystem that
provides DOCSIS-compliant bridging. For more information, refer to the
Bridging
and IBM Networking Command Reference
.
irb
(Optional) Displays integrated routing and bridging information for each interface
that has been configured for routing or bridging. This option does not really apply to
the Cisco uBR900 series; it is included because it is part of the subsystem that
provides DOCSIS-compliant bridging. For more information, refer to the
that has been configured for routing or bridging. This option does not really apply to
the Cisco uBR900 series; it is included because it is part of the subsystem that
provides DOCSIS-compliant bridging. For more information, refer to the
Bridging
and IBM Networking Command Reference
.
type
(Optional) Designed to display information about virtual LANs associated with the
interface; however, this option is not supported on the Cisco uBR900 series.
interface; however, this option is not supported on the Cisco uBR900 series.
Release
Modification
11.3 NA
This command was introduced.