Cisco Systems UBR900 User Manual

 Configuring the Cisco uBR900 Series Cable Access Routers 77

To display information about the baseline privacy key management exchange between the 
Cisco uBR900 series cable access router and the headend CMTS, use the show controllers 
cable-modem bpkm command in privileged EXEC mode.

show controllers cable-modem number bpkm

Syntax Description

Defaults

No default behavior or values.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Baseline privacy key management exchanges take place only when both the Cisco uBR900 series 
and the CMTS are running code images that support baseline privacy, and the privacy class of service 
is enabled via the configuration file that is downloaded to the cable access router. Baseline privacy 
code images for the Cisco uBR900 series contain k1 in the code image name. 

Examples

The following output is displayed when the headend CMTS does not have baseline privacy enabled:

uBR924# show controllers cable-modem 0 bpkm

CM Baseline Privacy Key Management

  configuration (in seconds): 

      authorization wait time:    10

      reauthorization wait time:  10

      authorization grace time:   600

      operational wait time:      1

      rekey wait time:            1

      tek grace time:             600

      authorization rej wait time: 60

  kek state:    STATE_B_AUTH_WAIT

  sid 4:

      tek state: No resources assigned

Controller number inside the Cisco uBR900 series cable access router.

11.3 NA

This command was introduced.