Cisco Systems UBR900 User Manual
show controllers cable-modem filters
Configuring the Cisco uBR900 Series Cable Access Routers 81
show controllers cable-modem filters
To display the registers in the MAC hardware that are used for filtering received frames, use the show
controllers cable-modem filters command in privileged EXEC mode.
controllers cable-modem filters command in privileged EXEC mode.
show controllers cable-modem number filters
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Some of the filtering parameters are MAC hardware addresses, Service IDs (SIDs), and upstream
channel IDs.
channel IDs.
number
Controller number inside the Cisco uBR900 series.
Release
Modification
11.3 NA
This command was introduced.