Compex Technologies 18A User Manual

 

 

91 

 

 
The user may connect to the CLI (Command Line Interface) via a 

TELNET session to the default IP, 192.168.168.1. This section uses Microsoft 

TELNET command for instruction. You may use any TELNET client.  
 

 

Connecting to CLI (Command Line Interface) via TELNET 
 

1. 

Connect to CLI (Command Line Interface) with the following 

command at DOS prompt. The TELNET application will then be launched and 
connected. 

 

 

At the login prompt, type in “password” (default password) and press the <ENTER> key, as 

shown in Figure 2.4c. You will then login to the CLI. 

 

 

 

 

Please refer to Appendix C for the list of commands 
available at the console.