Lucent Technologies 9077 16S User Manual

3-18

SP Switch Router Adapter Guide - 1.4 Update 2

Monitoring and Management Tools
SP Switch Router Adapter card maint commands

[RX] Switch Transmit Connection Rejects:      0

[RX] Switch Receive Encoding Errors:          0

[RX] Switch Receive Running Disparity Errors: 0

[RX] Switch Receive Receiver Errors:          0

[RX] Switch Receive Running Checksum Errors:  0

[RX] dont-free packets: 0

[RX] fifo-full packets: 0

maint 6 - display combus statistics

To look at information about the exchanges between the system software and the SP Switch 
Router Adapter card, enter maint 6 for the receive side and maint 106  for the transmit side.

GR 07> maint 6

[RX] Combus Status:

[RX]    Last interrupt status:           0x50502055

[RX] Combus Statistics:

[RX]    Message ready interrupts:             16153

[RX]    Truncated input messages:                 0

[RX]    Grit messages for TX-CPU:               155

[RX]    Ip messages Rcvd (non-bypass):            0

[RX]    Raw messages:                             0

[RX]    ISO messages:                             0

[RX]    Grid messages:                        15998

[RX]    Grid echo requests:                   15865

[RX]    Port available messages:                  0

[RX]    Segmented Packets:                        0

[RX]    Segments Sent:                            0

[RX] Combus Errors:

[RX]    Bus in timeouts:         0      Bus out timeouts:          0

[RX]    Out of buffer cond.:     0      Bad packet type:           0

[RX]    Dropped IP packets:      0      Bad packet dest:           0

[RX]    Receive Msg Errors:      0      Receive Format Errors:     0

[RX]    Receive Past End:        0      Received Long Message:     0

Filtering commands - maint 50-58, 150-58      

Odd-numbered commands 51–55 return information based on filter ID. Even-numbered 
commands 50–54 return information based on interface number. These are parameters added to 
some filter commands:

–

detail_level

 is an optional parameter that specifies how much information is 

returned, useful levels are 0 and 1. 

–

IF

 is an optional parameter that specifies the interface number.

–

ID 

is an optional parameter that specifies the filter ID randomly assigned by filterd.

[RX]  50:    Filtering filter list: [detail_level [ID]]

[RX]  51:    Filtering filter list: [detail_level [IF]]

[RX]  52:    Filtering action list: [detail_level [ID]]

[RX]  53:    Filtering action list: [detail_level [IF]]

[RX]  54:    Filtering binding list: [detail_level [ID]]

[RX]  55:    Filtering binding list: [detail_level [IF]]

[RX]  56:    Display filtering statistics: [IF#]

[RX]  57:    Reset filtering statistics: [IF#]

[RX]  58:    Show filter protocol statistics