Lucent Technologies 5800 Series User Manual

The Command Line Interface (CLI) is used for advanced router configuration. It 

can be accessed through a connection between your workstation and the console 

port of your router. Use a straight through (red label) cable and a DB9 adapter to 

connect your router to your PC serial port. Boot both systems and open a 

connection using your VT 100 terminal emulation program. Use the following 

port settings:

•

Baud Rate: 9600

•

Data bits:

8

•

Parity:

None

•

Stop bits:

1

•

Flow control:Hardware

For specific configuration information and instructions, please refer to the 

Command Line Interface Reference Manual included on your CD-ROM.

Figure 3-12: HyperTerminal Command Line Interface Screen