Lucent Technologies 6000 User Manual
3-70
MAX 6000/3000 Network Configuration Guide
Configuring WAN Access
Configuring outbound calls
Configuring outbound calls
Dialing through trunk group 2 (local port-to-port calls)
Use trunk group 2 for port-to-port calls within the MAX system. When 2 is the first digit in a
three-digit dial number, the MAX unit interprets the second and third digits as the slot and port
number of the called port. The second digit can be 0 or any number from 3 to 8. If it is zero, the
call goes to any available AIM port (the third digit is ignored in this case). If the second digit is
a number from 3 to 8, it represents an expansion slot number, and the third digit is the host port
on that card. Following are the related parameters (shown with sample settings):
three-digit dial number, the MAX unit interprets the second and third digits as the slot and port
number of the called port. The second digit can be 0 or any number from 3 to 8. If it is zero, the
call goes to any available AIM port (the third digit is ignored in this case). If the second digit is
a number from 3 to 8, it represents an expansion slot number, and the third digit is the host port
on that card. Following are the related parameters (shown with sample settings):
Host/AIM6 (or Host/Dual)
PortN Menu
Directory
bonding
Name=bonding
Dial #=241
With Dial # set to 241, the unit places a call to the first port of a Host/AIM6 or Host/Dual card
in slot 4.
in slot 4.
Dialing through trunk group 3 (Destination profiles)
When 3 is the first digit in a three-digit dialing prefix, the MAX unit interprets the next two
digits as the number of a Destination profile. Following are the related parameters (shown with
sample settings):
digits as the number of a Destination profile. Following are the related parameters (shown with
sample settings):
System
Destinations
outdial-1
Name=outdial-1
Option=1st Avail
Dial 1#=4-212-555-1212
System
Dial Plan
Dial Plan profile
Call-by-Call 1=1
PRI # Type=National
Transit #=
Bill #=
Host/AIM6 (or Host/Dual)
PortN Menu
Directory
call profile
Dial #=312
Ethernet
Connections
Connection profile
Dial #=312
With Dial # set to 312 in a call profile or Connection profile, the unit reads Destination profile
12. (The examples in this manual do not show profile numbers, because different MAX models
12. (The examples in this manual do not show profile numbers, because different MAX models