Lucent Technologies 6000 User Manual
3-82
MAX 6000/3000 Network Configuration Guide
Configuring WAN Access
Configuring MAXDAX
Configuring MAXDAX
E=Termsrv
D=Diagnostics
V=View ChanGroup/s
To display the current MAXDAX channel-group mappings, press V or select V=View
ChanGroup/s.
ChanGroup/s.
The current MAXDAX configuration appears, including a
channel-by-channel listing of channel groupings.
For example:
S:P:Ch
Dest | ChanGroup
>1:1:01
777 |
0
1:1:02
777 |
0
1:1:03
777 |
0
1:1:04
777 |
0
1:1:05
777 |
0
1:1:06
777 |
0
1:1:07
777 |
0
1:1:08
777 |
0
1:1:09
777 |
0
1:1:10
777 |
0
1:1:11
777 |
333
1:1:12
333 |
777
In the channel-group display:
•
S
indicates the slot number. For a MAX 6000 unit, the slot number can be either 1 or 2.
For a MAX 3000 unit, the slot number is always 1.
•
P
indicates the T1/E1 lines in the slot. The unit supports two T1/E1 lines per slot.
•
Ch
indicates the channel number on the T1 line.
•
Dest
indicates the value specified for Net/T1 (E1) > Line Config > Line Config profile >
Line N > Net2Net Incoming Calls > Ch N Dest ChanGroup.
•
ChanGroup
indicates the value specified for Net/T1 (E1) > Line Config > Line Config >
Line N > Net2Net ChanGroup ID > Ch N ChanGroup for the specified channel.
ChanGroup is the group to which you have assigned the channel. When the unit receives a
call on a channel, it makes the outgoing call on the first available channel for which
Net/T1 (E1) > Line Config > Line Config profile > Line N > Net2Net ChanGroup ID > Ch
N ChanGroup matches Net/T1 (E1) > Line Config > Line Config profile > Line N >
Net2Net Incoming Calls > Dest ChanGroup for the channel on which the unit receives the
incoming call.
call on a channel, it makes the outgoing call on the first available channel for which
Net/T1 (E1) > Line Config > Line Config profile > Line N > Net2Net ChanGroup ID > Ch
N ChanGroup matches Net/T1 (E1) > Line Config > Line Config profile > Line N >
Net2Net Incoming Calls > Dest ChanGroup for the channel on which the unit receives the
incoming call.
In the example, if the unit receives a call on channel 12 of the first line in the first slot, it places
the outgoing call on channel 11 of the first line in the first slot.
the outgoing call on channel 11 of the first line in the first slot.
Note:
The unit cannot make an outgoing call on the same channel on which it is receiving a
call. Make sure you do not configure a channel with identical channel-group and destination
channel-group numbers.
channel-group numbers.
Examples of MAXDAX configuration (T1)
This section describes two MAXDAX environments, including specific parameter settings.