Lucent Technologies 6000 User Manual

Page of 586
9-38
MAX 6000/3000 Network Configuration Guide
Configuring IP Routing
Configuring WAN interfaces
Encaps options...
Send Auth=CHAP
Recv PW=*SECURE*
9
Set the Route IP parameter to enable IP routing, and set the Pool parameter to specify the 
IP address pool from which the caller is assigned an IP address:
Route IP=Yes
IP options… 
LAN Adrs=0.0.0.0/0
RIP=Off
Pool=1
10 Exit the profile and, at the exit prompt, select the
 
exit and accept
 option.
Configuring RADIUS pseudo-user profiles
You can define address pools in a RADIUS pools pseudo-user profile. A pools pseudo-user 
profile uses the following format on its first line:
pools-name Password = "ascend", Service-Type = Outbound-User
The name argument is the MAX system name (specified by the Name parameter in the System 
profile). Subsequent lines in the profile define IP address pools by using the 
Ascend-IP-Pool-Definition (217) attribute. The value of the Ascend-IP-Pool-Definition 
attribute uses the following syntax:
pool-num base-addr assign-count
Following is a RADIUS pools profile:
pools-max01 Password = "ascend", Service-Type = Outbound-User
   Ascend-IP-Pool-Definition = "1 10.12.253.1 26
Configuring a host connection with a static address
A host connection with a static address enables the dial-in host to keep its own IP address when 
logging into the MAX IP network. For example, if a PC user telecommutes to one IP network 
and uses an ISP on another IP network, one of the connections can assign an IP address 
dynamically and the other can configure a host route to the PC. This example shows how to 
configure a host connection with a static address. (For details about the /32 subnet mask, see 
“IP address and subnet mask usage in MAX units” on page 9-1.)
Syntax element
Description
pool-num
Pool number. If you designate two pools by the same number, one 
locally and one in RADIUS, the RADIUS definition takes 
precedence. So if you have defined some pools in the IP-Global 
profile and do not wish to override them, start numbering the pools 
at the next number. For example, if you defined 10 pools in the IP-
Global profile, start with number 11 in RADIUS. Otherwise, start 
with 1.
base-addr
The base address in a pool of contiguous addresses on the local 
network or subnet. 
assign-count
Number of addresses included in the pool.