Lucent Technologies 6000 User Manual

MAX 6000/3000 Network Configuration Guide

 11-15

Set SAP Reply to Yes, and leave the default for UDP port:

Password=private

SAP Reply=Yes

UDP Port=5150

Exit the profile and, at the exit prompt, select the exit and accept option.

Open a Connection profile and configure an IP routing connection to the Foreign Agent. 
For example:

Ethernet

Connections

Station=foreign-agent

Active=Yes

Encaps=MPP

Dial #=555-1213

Route IP=Yes

Encaps options...

Send Auth=CHAP

Recv PW=foreign-pw

Send PW=home-pw

IP options...

LAN Adrs=10.65.212.226/24

Exit the profile and, at the exit prompt, select the exit and accept option.

When you configure the Home Agent in gateway mode, it receives GRE-encapsulated IP 
packets from the Foreign Agent, strips off the encapsulation, and passes the packets across a 
nailed WAN connection to the home network.

To enable hosts and routers on the home network to reach the mobile client, you must 

configure a static route in the Customer Premise Equipment (CPE) router on the home network 
(not in the Home Agent). The static route must specify the Home Agent as the route to the 
mobile client. That is, the route’s destination address specifies the Framed-Address of the 
mobile client, and its gateway address specifies the IP address of the Home Agent.