Adtran IPR-S1000 User Manual

25

4) With the  «+» or «-» key, select startup or load.
5) Confirm the selection by pressing the  «down» arrow.

This screen allows you to load a profile stored on a TFTP server.
1) In the «1. Set config» menu, select «14. Profiles». 
2) Enter that menu by pressing the «right» arrow. 
3)  Select «143. TFTP load», and enter that menu by pressing the
«right» arrow.

Example:

4) With the  «+» or «-» key, enter the TFTP server address.
5) Confirm the selection by pressing the  «down» arrow.

This screen allows you to save the current configuration to a TFTP 
server.
1) In the «1. Set config» menu, select «14. Profiles». 
2) Enter that menu by pressing the «right» arrow. 
3)  Select «144. TFTP save», and enter that menu by pressing the
«right» arrow.

Example:

Note: The current configuration will be saved on the TFTP server 
under the name dotlink.cnf

4) With the  «+» or «-» key, enter the TFTP server address.
5) Confirm the selection by pressing the  «down» arrow.

This screen allows you to enter a new password for the write level.

Factory profile:
                Startup
                Load

TFTP Server addr.:
192.168.001.004

TFTP Server addr.:
192.168.001.004