Lucent Technologies 9076 User Manual

2-14

SP Switch Router Adapter Guide - 1.4 Update 2

Configuring the SP Switch Router Adapter
Configuration required on the SP system

  

Here are several ways to determine the node number and other configuration data for a 
particular card. 

•

Check the SP Switch 

out.top

 file:

–

The value of the 

switch_node_number

 follows the 

"tb3"

 field in file output. In the 

example below, the 

switch_node_number

 is 

31

:

s 27 3  tb3 31 0     E02-S17-BH-J15 to E03-N47  # Dependent Node

–

The value of the 

node_number

 can be found by entering:

SDRGetObjects  DependentNode  switch_node_number==n

where 

n

 is the 

switch_node_number

.     

This produces output that looks like:

node_number  switch_node_number  ...

      47           31            ...

•

If the node is already defined to the SP system, but you do not know other configuration 
information, this command returns configuration information about the dependent nodes 
associated with SP Switch Router Adapters in your SP system. From the SP control 
workstation, enter: 

SDRGetObjects DependentNode

•

The system administrator may have labeled the switch cable connecting to the media card 
with the node number. 

•

If there is no terminal directly-attached to the SP Switch Router, check the router host 
name from the SP control workstation. From the control workstation, enter:

SDRGetObjects DependentNode node_number reliable_hostname 

This command returns host names and their corresponding node numbers for the attached 
SP Switch Routers.

Several dependent nodes will be associated with the same reliable host name for SP 
Switch Routers that have more than one SP Switch Router Adapter card.