Netopia 2200 User Manual
288
Syslog
set system syslog option [ off | on ]
Enables or disables system syslog feature. If syslog option is on, the following commands
are available:
are available:
set system syslog host-nameip [
ip_address | hostname ]
Specifies the syslog ser ver’s address either in dotted decimal format or as a DNS name up
to 64 characters.
to 64 characters.
set system syslog log-facility [ local0 ... local7 ]
Sets the UNIX syslog Facility. Acceptable values are
local0 through local7.
set system syslog log-violations [ off | on ]
Specifies whether violations are logged or ignored.
set system syslog log-accepted [ off | on ]
Specifies whether acceptances are logged or ignored.
set system syslog log-attempts [ off | on ]
Specifies whether connection attempts are logged or ignored.
Default
syslog
installation procedure
1.
Access the router via telnet from the private LAN.
DHCP ser ver is enabled on the LAN by default.
2.
The product’s stateful inspection feature must be enabled in order to
examine TCP, UDP and ICMP packets destined for the router or the private
hosts.
examine TCP, UDP and ICMP packets destined for the router or the private
hosts.
This can be done by entering the
CONFIG inter face.
• Type
config
• Type the command to enable stateful inspection