Enterasys Networks 1H582-xx User Manual
SNMP Command Set
Configuring SNMP Access Rights
5-29
5.2.3.2
set snmp access
Use this command to set an SNMP access configuration.
set snmp access groupname security-model {v1 | v2 | v3 {noauth | auth |
authpriv}} [read read] [write write] [notify notify] [volatile | nonvolatile]
authpriv}} [read read] [write write] [notify notify] [volatile | nonvolatile]
Security Level
Security level applied to this group. Valid levels
are:
are:
•
noauth — No authentication or privacy
protocol required.
protocol required.
•
auth — Authentication but no privacy protocol
required.
required.
•
authpriv — Authentication and privacy
protocol required.
protocol required.
Storage Type
Whether access entries for this group are stored in
volatile, nonvolatile or read-only memory.
volatile, nonvolatile or read-only memory.
Row Status
Status of this entry: active, notInService, or
notReady.
notReady.
Read View Name
Name of the view that allows this group to view
SNMP MIB objects.
SNMP MIB objects.
Write View Name
Name of the view that allows this group to
configure the contents of the SNMP agent
configure the contents of the SNMP agent
.
Notify View Name
Name of the view that allows this group to send an
SNMP notification. This can be configured with
the set snmp notify command as described in
SNMP notification. This can be configured with
the set snmp notify command as described in
.
Table 5-7
show snmp access Output Details (Continued)
Output
What It Displays...