Enterasys Networks 1H582-xx User Manual
VLAN Configuration Command Set
Assigning VLANs According to Classification Rules
7-27
Command Defaults
Data masks are required only for classification types requiring a second
data_value. For details, refer to
data_value. For details, refer to
Command Type
Switch command.
Command Mode
Read-Write.
Command Alternative (v2.05.xx and higher)
set policy classify (
)
create | enable |
disable
disable
create - Creates a new classification rule that will be
applied to the vlan-id.
applied to the vlan-id.
enable - If a classification rule is not entered in this
command, this entry enables the global classifier in the
device so that VLAN classification rules may be
implemented.
command, this entry enables the global classifier in the
device so that VLAN classification rules may be
implemented.
NOTE: Classification rules are automatically
enabled when created.
enabled when created.
disable - If a classification rule is not entered in this
command, this entry disables the global classifier in the
device so that VLAN classification rules may not be
implemented.
command, this entry disables the global classifier in the
device so that VLAN classification rules may not be
implemented.
If a classification rule is entered in this command, this
entry disables that VLAN classification rule for the
designated VLAN.
entry disables that VLAN classification rule for the
designated VLAN.