Enterasys Networks 1H582-xx User Manual
Port Priority and Classification Configuration Commands
Configuring Priority to Transmit Queue Mapping
9-8
Syntax Description
Command Defaults
If priority is not specified, all priority queue information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows the type of information provided when you use the show priority queue
command. In this case, the frames shown with a priority of 0 or 3 are transmitted according to the
transmit priority queue of 1 (the second lowest transmit priority); frames with 1 or 2 priority, at the
lowest transmit priority of 0; frames with 4 or 5 priority, at the second highest transmit priority of
2; and frames with 6 or 7 priority, at the highest transmit priority of 3:
command. In this case, the frames shown with a priority of 0 or 3 are transmitted according to the
transmit priority queue of 1 (the second lowest transmit priority); frames with 1 or 2 priority, at the
lowest transmit priority of 0; frames with 4 or 5 priority, at the second highest transmit priority of
2; and frames with 6 or 7 priority, at the highest transmit priority of 3:
This example shows how to display the transmit queue associated with priority 5.
priority
(Optional) Displays mapping of transmit queues for a
specific priority (0 - 7).
specific priority (0 - 7).
Matrix>show priority queue
Priority TxQueue
---------- ---------
0 1
1 0
2 0
3 1
4 2
5 2
6 3
7 3
Matrix>show priority queue 5
Priority TxQueue
---------- ---------
5 2