Enterasys Networks 1H582-xx User Manual
Logging and Network Management Command Set
Configuring System Logging
11-20
11.2.1.13clear logging application
Use this command to reset the logging severity level for one or all applications to the default value
of 5 (warning conditions).
of 5 (warning conditions).
clear logging application {mnemonic | all}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the logging severity level for SSH:
11.2.1.14show logging audit-trail
Use this command to display the contents of a logging audit trail file. This will be a record of all
events that occur when users request and use specific system resources. The device can store up to
200 messages.
events that occur when users request and use specific system resources. The device can store up to
200 messages.
show logging audit-trail [file]
Syntax Description
mnemonic
Resets the severity level for a specific application. Valid
mnemonic values and their corresponding applications are
listed in
mnemonic values and their corresponding applications are
listed in
.
all
Resets the severity level for all applications.
Matrix>clear logging application SSH
file
(Optional) Displays a specific audit-trail log file.