Enterasys Networks 1H582-xx User Manual
Process Overview: Routing Protocol Configuration
Configuring RIP
13-16
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command removes the send-lifetime configuration for an
authentication key. Start time can be specified, but is not mandatory:
authentication key. Start time can be specified, but is not mandatory:
no send-lifetime [start-time month date year]
Command Type
Router command.
Command Mode
Key chain key configuration: Matrix>Router(config-keychain-key)#
Command Defaults
None.
start-time
Specifies the time of day the authentication key will begin to
be valid to be sent. Valid input is hours:minutes:seconds
(hh:mm:ss)
be valid to be sent. Valid input is hours:minutes:seconds
(hh:mm:ss)
month
Specifies the month the authentication key will begin to be
valid to be sent. Valid input is the first three letters of the
month.
valid to be sent. Valid input is the first three letters of the
month.
date
Specifies the day of the month the authentication key will
begin to be valid to be sent. Valid values, depending on the
length of the month, are 1 - 31.
begin to be valid to be sent. Valid values, depending on the
length of the month, are 1 - 31.
year
Specifies the year the authentication key will begin to be
valid to be sent. Valid input is four digits up to 2035.
valid to be sent. Valid input is four digits up to 2035.
duration seconds
Length of time (in seconds) the key is valid to be sent. Valid
values are 1 - 4294967295.
values are 1 - 4294967295.
end-time
Specifies the hours, minutes and seconds (hh:mm:ss) and
the month, date and year from the start-time the key is valid
to be sent.
the month, date and year from the start-time the key is valid
to be sent.
infinite
Specifies that the key is valid to be sent from the start-time
on.
on.