Enterasys Networks 1H582-xx User Manual

If the device’s default user account settings have been changed, proceed as follows:

1. At the Username login prompt, enter your administratively-assigned user name and press 

ENTER.

2. At the Password prompt, enter your password and press ENTER.

The notice of authorization and the Matrix prompt displays as shown in 

Once the Matrix E1 device has a valid IP address, you can establish a Telnet session from any 
TCP/IP based node on the network as follows. 

1. Telnet to the device’s IP address. 

2. Enter login (user name) and password information in one of the following ways:

If the device’s default login and password settings have not been changed, follow the steps 
listed in 

, or

Enter an administratively-configured user name and password.

The notice of authorization and the Matrix prompt displays as shown in 

NOTE: Users with Read-Write (rw) and Read-Only access can use the set password 
command (

) to change their own passwords. Administrators with Super 

User (su) access can use the set system login command (

) to create 

and change user accounts, and the set password command to change any local 
account password.