Enterasys Networks 1H582-xx User Manual
Process Overview: Routing Protocol Configuration
Configuring OSPF
13-56
Example
This example shows how to display information about OSPF border routers. The first line of this
output shows that an intra-area route has been established to destination border router 192.168.22.1
via neighboring router 192.168.11.1 on the VLAN 2 interface in area 0. The OSPF cost of this route
is 64, and it carries an SPF calculation of 10. The destination router is an ABR:
output shows that an intra-area route has been established to destination border router 192.168.22.1
via neighboring router 192.168.11.1 on the VLAN 2 interface in area 0. The OSPF cost of this route
is 64, and it carries an SPF calculation of 10. The destination router is an ABR:
13.1.2.26show ip ospf interface
Use this command to display OSPF interface related information, including network type, priority,
cost, hello interval, and dead interval.
cost, hello interval, and dead interval.
show ip ospf interface [vlan vlan_id]
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
If vlan_id is not specified, OSPF statistics will be displayed for all VLANs.
Matrix>Router#show ip ospf border-routers
OSPF internal
Codes: i - Intra-area route, I - Inter-area route
i 192.168.22.1
[
64
]
via 192.168.11.1, VLAN2, ABR, Area 0, SPF 10
i 192.168.22.1
[
64
]
via 192.168.11.1, VLAN2, ABR, Area 4, SPF 10
i 192.168.44.1
[
64
]
via 192.168.33.1, VLAN1, ABR, Area 0, SPF 10
i 192.168.44.1
[
64
]
via 192.168.33.1, VLAN1, ABR, Area 2, SPF 7
i 192.168.44.2
[
128
]
via 192.168.33.1, VLAN1, ABR, Area 0, SPF 10
i 192.168.44.2
[
128
]
via 192.168.11.1, VLAN2, ABR, Area 0, SPF 10
vlan vlan_id
(Optional) Displays OSPF information for a specific VLAN.
This VLAN must be configured for IP routing as described
in
This VLAN must be configured for IP routing as described
in