Enterasys Networks 1H582-xx User Manual

Use this command to configure 802.1X authentication.

set dot1x auth-config {[authcontrolled-portcontrol {auto | forced-auth | 
forced-unauth}] [keytxenabled {false | true}] [maxreq value] [quietperiod 
value] [reauthenabled {false | true}] [reauthperiod value] [servertimeout 
timeout] [supptimeout timeout] [txperiod value]} port-string

authcontrolled-
portcontrol auto | 
forced-auth | 
forced-unauth

Specifies the EAPOL port control mode as: 

auto - Auto authorization mode. This is the default mode 
and will forward frames according to the authentication 
state of the port. For details on this mode, refer to 

forced-auth - Forced authorized mode, which disables 
authentication on the port.

forced-unauth - Forced unauthorized mode, which 
filters and discards all frames received on the port.

keytxenabled 
false | true

Enables (true) or disables (false) 802.1X key transmission.

maxreq value

Specifies the maximum number of authentictation requests 
allowed. Valid values are 1 - 2147483647.

quietperiod value

Specifies the time (in seconds) following a failed 
authentication before another attempt can be made. Valid 
values are 1 - 2147483647.

reauthenabled 
false | true

Enables (true) or disables (false) reauthentication control.

reauthperiod 
value

Specifies the time lapse (in seconds) between attempts to 
reauthenticate a port. Valid values are 1 - 2147483647.

servertimeout 
timeout

Specifies a timeout period (in seconds) for the 
authentication server. Valid values are 1 - 2147483647.