Enterasys Networks 1H582-xx User Manual
Security Configuration Command Set
Configuring MAC Locking
14-47
Syntax Description
Command Defaults
If no parameters are specified, MAC locking information will be displayed for all
end stations.
end stations.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display MAC locking information for all end stations known to the
device:
device:
port-string
(Optional) Displays end station information for specified
port(s). For a detailed description of possible port-string
values, refer to
port(s). For a detailed description of possible port-string
values, refer to
.
firstarrival |
firstarrival
port-string
firstarrival
port-string
(Optional) Displays MAC locking information about end
stations first connected to all MAC locked ports, or about
those first connected to specific port(s).
stations first connected to all MAC locked ports, or about
those first connected to specific port(s).
static | static
port-string
port-string
(Optional) Displays MAC locking information about
static (management defined) end stations connected to all
MAC locked ports, or about those connected to specific
port(s).
static (management defined) end stations connected to all
MAC locked ports, or about those connected to specific
port(s).
Matrix>show maclock stations
Number of stations found: 5
Port Number MAC address
Status State
------------ ----------------- --------------- --------------
fe.0.5 00-00-00-11-22-33
active
static
fe.0.8 00-20-78-06-0e-a0
active
first learned
fe.0.8 00-44-55-44-55-21
active
static
fe.0.8 00-a0-39-00-0c-7b
active
first learned
fe.0.22 11-22-33-44-55-66
active
static