Enterasys Networks 1H582-xx User Manual
Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-75
14.3.5.13set pwa initialize
Use this command to initialize a PWA port to its default unauthenticated state.
set pwa initialize [port-string]
Syntax Description
Command Defaults
If port-string is not specified, all ports will be initialized.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to initialize Fast Ethernet front panel ports 5-7:
14.3.5.14set pwa quietperiod
Use this command to set the amount of time a port will remain in the held state after a user
unsuccessfully attempts to log on to the network.
unsuccessfully attempts to log on to the network.
set pwa quietperiod time [port-string]
Syntax Description
Command Defaults
If port-string is not specified, quiet period will be set for all ports.
port-string
(Optional) Initializes specific port(s). For a detailed
description of possible port-string values, refer to
description of possible port-string values, refer to
Matrix>set pwa initialize fe.0.5-7
time
Specifies quiet time in seconds.
port-string