Enterasys Networks 1H582-xx User Manual

Use this command to enable or disable flow setup throttling globally or on one or more port(s), or 
to re-enable one or more port(s) that were disabled due to flow setup throttling.

set flowlimit {[system | port-string disable | enable] [port-string operational]}

Switch command.

Read-Write.

Flow limit 
shutdown

Whether flow limit shut down is enabled or disabled. 
Default state of disabled can be changed with the set 
flowlimit shutdown command (

Flow limit 
notification 
interval

Interval in seconds at which an SNMP notification will be 
sent when a specified flow limit is reached. This function 
can be enabled, and the default interval of 120 can be 
changed, with the set flowlimit notification command 
(

).

Flow limit 
maximum 
flowcount

Number of flows that, if exceeded, will trigger a configured 
action. Set using the set flowlimit limit command 
(

).

Flow limit table

Lists flow limits and assigned actions for FST port 
classifications.

system | 
port-string 
disable | enable

Enables or disables FST globally or one specific port(s).

port-string 
operational

Re-enables one or more ports disabled by the flow limit 
shut down function (as described in 

).