Symbol Technologies AP-5131 User Manual
AP-5131 Access Point Product Reference Guide
B-12
13. Select
Pre Shared Key (PSK)
from the IKE Authentication Mode drop-down menu.
14. Enter a
Passphrase
. Passphrases must match on both VPN devices.
15. Select
AES 128-bit
as the IKE Encryption Algorithm.
16. Select
Group 2
as the Diffie -Hellman Group. Click
OK
. This will take you back to the VPN
screen.
17. Click
Apply
to make the changes
18. Check the
VPN Status
screen. Notice the status displays "NOT_ACTIVE". This screen
automatically refreshes to get the current status of the VPN tunnel. Once the tunnel is
active, the IKE_STATE changes from NOT_CONNECTED to SA_MATURE.
active, the IKE_STATE changes from NOT_CONNECTED to SA_MATURE.
NOTE
Ensure the IKE authentication Passphrase is the same as the Pre-shared
key on the Cisco PIX device.
key on the Cisco PIX device.