IBM WRT-410 User Manual

 

- 47 - 

6. Enter the IP address, Port number, and Shared Secret Key used by the Secondary Radius Server.   

7. Click 

“Apply”. The 802.1x settings will take effect right after WRT-410 reboots itself.

 

Windows XP is originally 802.1X support. As to other operating systems (windows 98SE, ME, 2000), an 

802.1X client utility is needed. The following procedures show how to configure 802.1X Authentication 

with WL-3555 in Windows XP.   

Please note that if you want to change the 802.1x authentication type of a wireless client, i.e. switch to 

EAP-TLS from EAP-MD5, you must remove the current existing wireless network from your preferred 

connection first, and add it in again. 

1. Go to Start > Control Panel, double-click on 

“Network Connections”. 

2. Right-click on the Wireless Network Connection which using WL-3555. 

3. Click 

“Properties” to open up the Properties setting window.   

4. Click on the 

“Wireless Network” tab.