Philips CPWBS001 User Manual

Thank you for purchasing the Philips Wireless Base Station.This Wireless
Base Station is a 11 Mbps wireless residential gateway, especially designed to
provide a simple and cost effective Internet access solution for both home
and SOHO users.

The Ethernet To Modem interface is designed to link the base station to
Internet through any xDSL or Cable broadband modem, enabling users to
link their home network to the Internet through its built-in 10/100Mbps
Ethernet LAN and Wireless Local Network interfaces.

Besides flexibility on home network connectivity, the CPWBS001 also
provides network security and management features for users like Network
Address Translation (NAT), Dynamic Host Configuration Protocol (DHCP),
advanced packet filtering with hacker attack monitor, logging and stateful
packet inspection (Firewall-SPI). Also, Universal Plug and Play (UPnP),
Dynamic DNS (DDNS), WiFi Protected Access (WPA), 802.1x + TKIP, and
wireless to wired Ethernet bridging are all supported.

For connecting to your Wireless Network (also called WLAN or WiFi).
- The indicator LED lights up if there is an active connection.

• Press it for 2 seconds to reboot the wireless base station.
• Keep it pressed for more than 5 seconds to restore the factory

default settings.

RJ-45 sockets for Broadband Modem and Ethernet network cables.

Socket for connecting the power adapter to the Wireless Base station.

Display the network status.

PWR

Blue

On when receiving power.
Off when power is disconnected

WLAN

Off when wireless is disabled

(Wireless

Blue

On when wireless enabled and client active.

home network)

Blinking when wireless enabled and no client.

To Modem 

Blue

On when a link is established.

(Internet modem)

Blinking when there is no link.

1/2/3/4 LAN 

Yellow (10 Mbps)

Off if not connected

(Wired home 

Blue (100 Mbps)

On when a link is established.

network)

Blinking when transmitting.

5