Manualsbrain.com
  1. Manuals
  2. Brands
  3. Riverstone Networks
  4. WICT1-12
  5. User Manual

Riverstone Networks WICT1-12 User Manual

Download
Page of 718
28-6   Riverstone Networks RS Switch Router User Guide   Release 8.0 
Configuring RMON Groups
  RMON Configuration
To find out which host or user is using these applications/protocols on this port, use the following command:
28.3 CONFIGURING RMON GROUPS
As mentioned previously, control tables in many RMON groups specify the data that is to be collected for the particular 
RMON group. If the information you want to collect is in the default control tables, then you only need to turn on the 
default tables when you specify the RMON groups (Lite, Standard, or Professional); you do not need to configure 
entries in the default tables.
 The following table shows the 
rmon
 command that you use to configure each RMON group:
rs# 
rmon show al-matrix et.5.5
RMON II Application Layer Host Table
Index: 500, Port: et.5.5, Inserts: 4, Deletes: 0, Owner: monitor
SrcAddr         DstAddr            Packets     Octets  Protocol
-------         -------            -------     ------  --------
10.50.89.88     15.15.15.3            1771     272562  *ether2.ip-v4
10.50.89.88     15.15.15.3            1125     211192  *ether2.ip-v4.tcp
10.50.89.88     15.15.15.3            1122     210967  *ether2.ip-v4.tcp.telnet
10.50.89.88     15.15.15.3               3        225  *ether2.ip-v4.tcp.www-http
To configure the Address Map 
group.
rmon address-map index
 <index-number> 
port
 <port> 
[owner
 
<string>
] [status enable|disable]
To configure the Application 
Layer Matrix top n entries.
rmon al-matrix-top-n index
 <index-number> 
matrix-index 
<number> 
ratebase terminal-packets|terminal-octets|
all-packets|all-octets duration 
<number> 
size
 <number> 
[owner
 <string>
] [status enable|disable]
To configure the Alarm group.
rmon alarm index 
<index-number> 
variable
 <string> 
[interval 
<seconds>
] [falling-event-index
 <num>
] [falling-threshold
 
<num>
] [owner 
<string>
] [rising-event-index 
<num>
] 
[rising-threshold 
<num>
] [startup rising|falling|both] 
[status enable|disable] [type absolute-value|delta-value]
To configure the Packet Capture 
group.
rmon capture index
 <index-number> 
channel-index
<number> 
[full-action lock|wrap] [slice-size 
<number>
] 
[download-slice-size 
<number>
] [download-offset 
<number>
] 
[max-octets 
<number>
] [owner <string>] [status 
enable|disable]