TP-LINK TL-WA830RE User Manual
TL-WA830RE
300Mbps Wireless N Range Extender User Guide
¾
Wired - This field displays the current settings or information for the Network, including the
MAC address, IP address and Subnet Mask.
MAC address, IP address and Subnet Mask.
¾
Wireless - This field displays basic information or status for wireless function, including
Wireless Mode, SSID, Channel, Mode, Channel Width, Max Tx Rate and MAC Address.
Wireless Mode, SSID, Channel, Mode, Channel Width, Max Tx Rate and MAC Address.
¾
Traffic Statistics - This field displays the AP's traffic statistics.
¾
System Up Time - This filed displays the run time of the AP since it’s powered on or reset.
)
Note:
If you select Access Point mode in Figure 3-10, the wireless status in Figure 4-1 will change,
similar to the figure below:
similar to the figure below:
4.2 Quick Setup
4.3 QSS
QSS (Quick Secure Setup) can help you to quickly and securely connect to a network. This
section will guide you to add a new wireless device to an existing network quickly by function.
Select menu “QSS”, you will see the next screen shown in Figure 4-2.
section will guide you to add a new wireless device to an existing network quickly by function.
Select menu “QSS”, you will see the next screen shown in Figure 4-2.
Figure 4-2 QSS
¾
Operation Mode - Displays the current operation mode of the device.
18