TP-LINK TD-VG3511 User Manual

 

8 

 

Before installing the device, please make sure your broadband service provided by your ISP is 
available. If there is any problem, please contact your ISP. Before cable connection, cut off the 
power supply and keep your hands dry. You can follow the steps below to install it. 

Step 1:  Connect the ADSL Line. You can use a separate splitter. External splitter can divide the 

data and voice, and then you can access the Internet and make calls at the same time. 
The external splitter has three ports: 

• LINE: Connect to the wall jack 

• PHONE: Connect to the phone set   

• MODEM: Connect to the ADSL port of the Modem Router TD-VG3511 

Step 2:  Connect the Ethernet cable. Attach one end of a network cable to your computer’s 

Ethernet port or a regular hub/switch port, and the other end to the LAN port on the 
Modem RouterTD-VG3511. 

Step 3:  Connect your telephone to the Port labeled “PHONE 1/2” on the Modem Router with a 

telephone line. 

Step 4:  Connect your USB device to the USB port labeled “USB” on the Modem Router. 

If you want to share files or use the USB Voice Mail function, please plug an external USB hard 
drive/USB flash disk into the USB port. To use the printer function, please connect a USB printer 
to the USB port. 

To use USB Voice Mail function, please make sure the free space of the plugged external USB 
hard drive/USB flash disk is more than 4MB. 

Step 5:  Power on the computers and LAN devices. 

Step 6:  Attach the power adapter. Connect the power adapter to the power connector on the rear 

of the device and plug in the adapter to an electrical outlet or power extension. The 
electrical outlet shall be installed near the device and shall be easily accessible.