TP-LINK TL-SG3210 User Manual

 

142

 

Create a MAC ACL whose ID is 23: 

TL-SG3424(config)# mac access-list 23 

The access-list standard command is used to add Standard-IP ACL rule. To 

delete the corresponding rule, please use no access-list standard command. 

Standard-IP ACLs analyze and process data packets based on a series of 

match conditions, which can be the source IP addresses and destination IP 

addresses carried in the packets. 

access-list standard acl-id rule rule-id [ deny | permit ] [[ sip source-ip ] smask 

source-ip-mask] [[ dip  destination-ip  ]  dmask  destination-ip-mask  ] [ tseg 

time-segment ]  

no access-list standard acl-id rule rule-id 

acl-id  ——  The desired Standard-IP ACL for configuration. 

rule-id  ——  The rule ID. 

deny  ——  The operation to discard packets. 

permit  ——The operation to forward packets. It is the default value. 

source-ip  ——  The source IP address contained in the rule. 

source-ip-mask  —— The source IP address mask. It is required if you typed 

the source IP address. 

destination-ip  ——  The destination IP address contained in the rule. 

destination-ip-mask  ——  The destination IP address mask. It is required if you 

typed the destination IP address. 

time-segment  —— The time-range for the rule to take effect. By default, it is 

not limited. 

Global Configuration Mode 

Create a Standard-IP ACL whose ID is 120, and add Rule 10 for it. In the rule, 

the source IP address is 192.168.0.100, the source IP address mask is