TP-LINK TL-MR3220 User Manual

 

-50- 

 

Figure 4-35  Virtual Servers 

¾

 

Service Port - The numbers of External Ports. You can type a service port or a range of 

service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port 

number).  

¾

 

Internal Port  -  The Internal Service Port number of the PC running the service 

application.   

¾

 

IP Address - The IP Address of the PC providing the service application. 

¾

 

Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols 

supported by the Router). 

¾

 

Status - The status of this entry either Enabled or Disabled. 

1. Click 

the Add New… button. (pop-up Figure 4-36) 

2.  Select the service you want to use from the Common Service Port list. If the Common 

Service Port list does not have the service that you want to use, type the number of the 

service port or service port range in the Service Port box. 

3. Leave 

the 

Internal Port blank if it is the same as the Service Port, or enter a specific port 

number when Service Port is a single one. 

4.  Enter the IP Address of the computer in the IP Address box.  

5.  Select the protocol used for this application, either TCP or UDP, or All. 

6. Select 

the 

Enable check box to enable the virtual server. 

7. Click 

the 

Save button.