TP-LINK tl-sl5428e User Manual
229
Test:
Click the Test button to start the loopback test for the port.
14.4 Network Diagnose
This switch provides Ping test and Tracert test functions for network diagnose.
14.4.1 Ping
Ping test function, testing the connectivity between the switch and one node of the network,
facilitates you to test the network connectivity and reachability of the host so as to locate the
network malfunctions.
facilitates you to test the network connectivity and reachability of the host so as to locate the
network malfunctions.
Choose the menu Maintenance→Network Diagnose→Ping to load the following page.
Figure
14-9 Ping
The following entries are displayed on this screen:
¾
Ping Config
Destination IP:
Enter the IP address of the destination node for Ping test.
Ping Times:
Enter the amount of times to send test data during Ping testing. The
default value is recommended.
default value is recommended.
Data Size:
Enter the size of the sending data during Ping testing. The default
value is recommended.
value is recommended.
Interval:
Specify the interval to send ICMP request packets. The default value
is recommended.
is recommended.