TP-LINK AC750 User Manual

 

- 5 - 

 

Figure 1-2 Rear Panel sketch 

The following parts are located on the rear panel (View from left to right). 



 

WPS/Reset:   

Pressing this button for less than 5 seconds enables the WPS function. If your client devices, 

such as wireless adapters, support Wi-Fi Protected Setup, then you can press this button to 

quickly establish a connection between the router and client devices and automatically 

configure wireless security for your wireless network.   

Pressing this button for more than 5 seconds enables the Reset function. With the router 

powered on, press and hold the WPS/Reset button (approximately 8 seconds) until all LEDs 

are lit. And then release the button and wait for the router to reboot to its factory default 

settings. 



 

Wireless On/Off: The button for the wireless function. 



 

Internet: This port is where you will connect the DSL/cable Modem, or Ethernet. 



 

Ethernet (1, 2, 3, 4): These ports (1, 2, 3, 4) connect the router to the local PC(s).