TP-LINK TD-W8970N User Manual
TD-W8970N
Wireless N ADSL2+ Modem Router User Guide
To configure Mixed WPA2/WPA-PSK settings, select the Mixed WPA2/WPA-PSK option from the
drop-down list. The menu will change to offer the appropriate settings. The steps of this setting are
the same with WPA-PSK.
drop-down list. The menu will change to offer the appropriate settings. The steps of this setting are
the same with WPA-PSK.
Figure 4-85
4.5.3 MAC Filter
Choose “Wireless”Æ”MAC Filter”, you will see the screen of Wireless--MAC Filter settings
shown as below.
shown as below.
Figure 4-86
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting
within your network’s RADIUS. To filter wireless users by MAC Address, either permitting or
blocking access. If you do not wish to filter users by MAC Address, select Disabled.
within your network’s RADIUS. To filter wireless users by MAC Address, either permitting or
blocking access. If you do not wish to filter users by MAC Address, select Disabled.
¾
Disabled: Select this option to disable MAC Filter function.
¾
Allow: Select this option to enable MAC Filter function that allow wireless access by the
devices listed on this screen.
¾
Deny: Select this option to enable MAC Filter function that block wireless access from the
devices listed on this screen.
81