TP-LINK TD-W8950ND User Manual
TD-W8950ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-66
4.5.2.1 WPS Setup
This section will guide you to add a new wireless device to an existing network quickly by WPS (or
called QSS) method.
called QSS) method.
)
Note:
1) This feature is available only when OPEN, WPA2-PSK or Mixed WPA2/WPA-PSK mode is
configured.
2)
To build a successful connection by WPS, you should also do the corresponding configuration
of the new device for WPS function meanwhile.
of the new device for WPS function meanwhile.
I. By PBC
If the wireless adapter supports WPS and the Push Button Configuration (PBC) method, you can
add it to the network by PBC with the following two methods. Click Push-Button, you will see the
screen as shown below.
add it to the network by PBC with the following two methods. Click Push-Button, you will see the
screen as shown below.
62