TP-LINK Archer D7b User Manual

    Archer D7b 

 

66 



  Security:  The default value is disabled, but it’s strongly recommended to enable 

WPA/WPA2-Personal. WPA/WPA2-Personal is the WPA/WPA2 authentication type based 
on pre-shared passphrase. 



  Authentication Type: Select the Authentication Type from the drop-down list, the default 

method is Auto, and you can leave it as a default setting. 



  Encryption: You can select either Auto, or TKIP or AES. 



  Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to 64 

Hexadecimal characters. 



  Group Key Update Period: Specify the group key update interval in seconds. The value 

should be 30 or above. Enter 0 to disable the update. 



  Allow Guests to access my Local Network: The guests have access to your Local 

Network, but can not login the modem router’s web management interface. 



  Allow Guests to access my USB Storage Sharing: The guests can access the specified 

files on the USB storage device via the function of USB Storage Sharing, but the function of 
FTP Server, Media Server  and  Print Server  are  not available in Guest Network. For more 
details please refer to 



  Guest Network Isolation: This function can isolate wireless clients on your guest network 

from each other. Client isolation is disabled by default. 

 



  Guest Network Bandwidth Control: With this function, you can configure the Upstream 

Bandwidth and Downstream Bandwidth for guest network. 

Click Save to save your settings. 

Choose menu “Guest Network”“Basic Settings 5GHz”, and you will see the screen as shown 
in  Figure 4-51. This feature allows you to create a separate network for your guests without 
allowing them to access your main network and the computers connected to it.