TP-LINK AC1750 User Manual

7

Chapter 1

Get to Know About Your Modem Router

The modem router’s back panel shows the connection ports, buttons and antennas. 
Refer to the following for detailed instructions.

ADSL

For connecting the modem router to the Internet. Connect the port to the 

splitter or directly connect the port to the phone jack via a phone cable. For 

details, please refer to Connect the Modem Router.

 

USB

For connecting to a USB storage device or a USB printer

.

WPS

The switch for the WPS function.

WiFi ON/OFF

For turning on/off the Wi-Fi function.

RESET

The switch for the RESET function. There are two ways to reset the modem 

router’s factory defaults.

Method one: With the modem router powered on, use a pin to press and hold 

the RESET button on the rear panel of the modem router for 8 seconds until 

all LEDs turn off momentarily, then release the button.

Method two: Log into the web management page of the modem router, and 

go to 

Advanced

 > 

System Tools

 > 

Backup & Restore

,  click 

Factory Restore

 and 

wait until the reset process is complete.

LAN1, LAN2, LAN3,

LAN4/WAN

For connecting the modem router to your PC or other Ethernet network 

devices. In wireless router mode you will be able to connect to Cable/FTTH/

VDSL/ADSL devices.

POWER ON/OFF

The switch for the power. Press it to power on or off the modem router.

POWER

For connecting the modem router to power socket via the provided power 

adapter.

Antennas

Used for wireless operation and data transmit. Upright them for the best Wi-Fi 

performance.