TP-LINK 1910010885 User Manual

 

98 

With the modem router powered on, press and hold the RESET button on the rear panel for 8 to 
10 seconds before releasing it. 

) 

Note:

 

Once the modem router is reset, the current configuration settings will be lost and you will need to 
re-configure the router.   

1)  Restore the modem router’s configuration to its factory default settings. If you don’t know how 

to do that, please refer to T1. 

2)  Use the default user name and password: admin, admin. 
3)  Try to configure your modem router once again by following the instructions in 

1)  Configure your computer’s IP Address. 

z

 

Click the Apple icon on the upper left corner of the screen. 

z

 

Go to “System Preferences -> Network”. 

z

 

Select  Airport on the left menu bar, and then click Advanced for wireless configuration; or 
select Ethernet for wired configuration. 

z

 

In the Con-figure IPv4 box under TCP/IP, select Using DHCP. 

z

 

Click Apply to save the settings. 

z

 

Click “Start -> Control Panel -> Network and Internet -> View network status -> Change 
adapter settings”. 

z

 

Right-click  Wireless Network Connection (or Local Area Connection), and then click 
Properties. 

z

 

Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties. 

z

 

Select Obtain an IP address automatically and Obtain DNS server address automatically. 
Then click OK. 

z

 

Click “Start -> Control Panel -> Network and Internet Connections -> Network 
Connections”. 

z

 

Right-click  Wireless Network Connection (or Local Area Connection), and then click 
Properties. 

z

 

Select Internet Protocol (TCP/IP), and then click Properties.