TP-LINK 1910010885 User Manual
TD-W8970B
300Mbps Wireless N Gigabit ADSL2+ Modem Router (Annex B) User Guide
6
1.3.2 The Back Panel
Figure 1-2
¾
ADSL: Through the port, you can connect the modem router with the telephone. Or you can
connect them by an external separate splitter. For details, please refer to
¾
USB1, USB2: The USB port connects to a USB storage device or a USB printer.
¾
WPS: The switch for the WPS function. For details, please refer to
¾
WiFi: The switch for the WiFi function. Move it to left /right to enable/disable the WiFi function.
¾
RESET: There are two ways to reset the modem router's factory defaults.
Method one: With the modem router powered on, use a pin to press and hold the Reset
button for at least 5 seconds. And the Router will reboot to its factory default settings.
button for at least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from “Maintenance-SysRestart” of the modem
router's Web-based Utility.
router's Web-based Utility.
¾
LAN4/WAN, LAN3, LAN2, LAN1: Through these ports, you can connect the modem router to
your PC or the other Ethernet network devices. Enable EWAN function and you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
connect to Cable/FTTH/VDSL/ADSL device.
¾
ON/OFF: The switch for the power.
¾
POWER: The Power plug is where you will connect the power adapter.
¾
Antennas: Used for wireless operation and data transmit.