TP-LINK 1910010885 User Manual

 

55 

There are six submenus under the USB Settings menu, USB Mass  Storage,  User Accounts, 
Storage Sharing, FTP Server, Media Server and Print Server. Click any of them, and you will be 
able to configure the corresponding function. 

Choose menu “USB Settings  →  ”USB Mass  Storage”, you can configure a USB disk drive 
attached to the modem router and view volume and share properties such as share name, 
capacity, status, and action, etc on this page as shown below. 

 

 

Figure 4-43 

¾

 

Volume: The volume name of the USB drive the users have access to.   

¾

 

File System: The system of the USB drive. 

¾

 

Capacity: The storage capacity of the USB driver.     

¾

 

Status: Indicates the shared or non-shared status of the volume. Online means volume can 
be shared, while Offline means volume can not be shared. If Deactivate in Action field is 
enabled,  Disabled will be displayed in the Status field, which means volume can not be 
shared.  

¾

 

Action: When the volume is shared, you can click the Deactivate to stop sharing the volume; 
when volume is non-shared, you can click the Enable button to share the volume. 

Click Disconenct to safely remove the USB storage device that is connected to USB port.   

)

Before removing the USB storage device, you should click “Disconnect” to make sure that all your 
data have been saved completely. Removing device directly may cause your USB storage device 
crashed.

 

You can specify the user name and password for Storage Sharing and FTP Server users on this 
page. Storage Sharing users can access the folders by entering the following URL into the