TP-LINK 1.0.0 1910010798 User Manual

 

11 



 

Firmware Version - This field displays the current firmware version of the Range Extender. 



 

Hardware Version - This field displays the current hardware version of the Range Extender. 



 

Connection Status to Existing Network - This part shows you the current information of the 

root wireless network which the device is connecting to.   



 

Root Wireless Network Name (SSID) - It shows the name of the wireless network which 

your device is connecting to.   



 

Signal - It shows the root wireless network's signal strength that the device has received.   



 

Connection Status - It shows whether your device has been connected to a wireless 

network currently. "

Connected" means the range extender have connected to a wireless 

network, while if it shows "disconnected", you can click "

connect" to connect.   



 

Wired - This field displays the current settings or information for the Network. 



 

MAC Address - The physical address of the system, as seen from the Network -> LAN 

page.   



 

IP Address - The IP address of the wired LAN.   



 

Subnet Mask - The subnet mask associated with IP address.   



 

Wireless - This field displays basic information or status for wireless function. 



 

Operation Mode - Indicates the mode which the device is working on. "Disable" means 

the wireless radio has been turned off. You can configure it in the 

Settings page.   



 

Local Wireless Network Name (SSID)  -  The Device's wireless network name (also 

called SSID) which your PC or other device can be connected to.   



 

Channel - The current wireless channel in use.   



 

Mode - The current wireless mode which the Range Extender works on.   



 

Channel Width - The bandwidth of the wireless channel.   



 

Wireless Rate - It shows the current wireless rate between the range extender and your 

PC or other devices which are connected to it.   



 

Traffic Statistics - This field displays the Range Extender's traffic statistics.   



 

Sent (Bytes) - Traffic that counted in bytes has been sent out from wireless.   



 

Sent (Packets) - Traffic that counted in packets has been sent out from wireless.   



 

Received (Bytes) - Traffic that counted in bytes has been received from wireless.   



 

Received (Packets) - Traffic that counted in packets has been received from wireless. 



 

System Up Time - This filed displays the run time of the Range Extender since it’s powered 

on or reset. 



 

Click the 

Refresh button to get the latest status and settings of the device.   

Please refer to 

. 

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This 

section will guide you to add a new wireless device to an existing network quickly by WPS function. 

The WPS function can be configured on the page as shown in Figure 4-2.