TP-LINK TL-WR847N User Manual

TL-WR841N/TL-WR841ND/TL-WR847N

 

- 38 - 

 

Figure 4-23    Add or Modify Wireless MAC Address Filtering entry 

To add or modify a MAC Address Filtering entry, follow these instructions: 
1.  Enter the appropriate MAC Address into the MAC Address field. The format of the MAC 

Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 
00-0A-EB-B0-00-0B.  

2.  Give a simple description for the wireless station in the Description field. For example: 

Wireless station A. 

3. Select 

Enabled or Disabled for this entry on the Status drop-down list. 

4. Click 

the 

Save button to save this entry. 

To modify or delete an existing entry: 
1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   
3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled 
Click the Disable All button to make all entries disabled. 
Click the Delete All button to delete all entries. 
Click the Next button to go to the next page. 
Click the Previous button to return to the previous page. 
For example: If you desire that the wireless station A with MAC address 00-0A-EB-B0-00-0B and 
the wireless station B with MAC address 00-0A-EB-00-07-5F are able to access the Router, but all 
the other wireless stations cannot access the Router, you can configure the Wireless MAC 
Address Filtering list by following these steps: 

1. Click 

the 

Enable button to enable this function. 

2.  Select the radio button “Allow the stations specified by any enabled entries in the list to 

access” for Filtering Rules. 

3.  Delete all or disable all entries if there are any entries already. 
4. Click 

the Add New... button.  

1)  Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field. 
2)  Enter wireless station A/B in the Description field. 
3) Select 

Enabled in the Status drop-down list. 

4) Click 

the 

Save button. 

5) Click 

the 

Back button. 

The filtering rules that configured should be similar to the following list: